Stay Updated with Agro Cultures News




Interdum nullam est, aliquam consequat, neque sit ipsum mi dapibus quis taciti. Ullamcorper justo, elementum pellentesque gravida quisque.

Images are for illustration. Batch-specific photos and a redacted sample COA are available on request.
Standardized Nigella sativa seed extract, HPLC-assayed to min. 2% / 5% / 10% thymoquinone. Suitable for capsules, tablets and skincare creams; not directly water-soluble — a carrier or solubilizer is required for clear aqueous systems. Each grade is released against an HPLC assay for raw-material marker consistency.
Raw-material batch consistency does not guarantee finished-product claims; final formulation and stability must be verified on the finished product.
Batch release by HPLC against the selected minimum thymoquinone grade. The seed oil and high-purity monomer pages carry separate specifications with their own assay definitions.
Process: Ethanol/water extraction of Nigella sativa seed, followed by concentration, purification, drying and milling. Marker standardization is the core release control. Detailed process flow and impurity control parameters are available under NDA.
| Parameter | Specification / Method | Note |
|---|---|---|
| Assay (Thymoquinone) | Min. 2% / 5% / 10% (HPLC, dry basis) | Grade selected at order |
| Detection | 259 nm (HPLC-UV) | Marker quantitation |
| Appearance | Brown to dark yellow-brown fine powder | Uniform color, no visible foreign matter |
| Particle size | ≥ 95% through 80 mesh | 100 mesh on request |
| Loss on drying | ≤ 5.0% | — |
| Ash | ≤ 5.0% | — |
| Total heavy metals | ≤ 10 ppm | General specification; market-specific limits apply where required |
| Lead (Pb) | ≤ 0.5 ppm | — |
| Arsenic (As) | ≤ 0.3 ppm | — |
| Mercury (Hg) | ≤ 0.1 ppm | — |
| Cadmium (Cd) | ≤ 0.5 ppm | — |
| Total aerobic count | ≤ 1,000 cfu/g | — |
| Yeast & mold | ≤ 100 cfu/g | — |
| E. coli / Salmonella | Not detected in 25 g | — |
| Residual solvent | Ethanol/water extraction system | Ethanol residue controlled per specification or customer requirement; pharma-grade control aligned with ICH Q3C available on request |
Routine batch tests: heavy metals, microbiology, residual solvent. Additional tests (pesticide residue, PAH, allergen statement, non-GMO statement) available on request. The sample COA shows the thymoquinone assay and impurity profile for grade comparison.
This powder is soluble in ethanol and dispersible in vegetable oil carriers. Powder may settle in oil systems without a carrier; pre-dispersion and homogenization are recommended. It cannot form a true solution in plain water.
| Dosage form | Constraint | Viable engineering path |
|---|---|---|
| Capsule / tablet | Dry state; dispersion is not the limiting factor. | Direct blending of 80–100 mesh powder; control blend uniformity and flowability. |
| Oil serum / anhydrous balm | Dispersible in oil; powder may settle on standing. | Pre-disperse in a vegetable oil or emulsifier system; homogenize under controlled temperature. |
| Cream / lotion emulsion | Powder dispersion across phases and marker stability under heat. | Add at cooled-down stage where feasible; pair with chelator and antioxidant system. |
| Clear aqueous serum / toner | Not water-soluble; direct addition causes sediment and cloudiness. | Use a solubilized or carrier-loaded grade; review formula before lock. |
Important: Direct addition to clear water-based formulas is not feasible without a solubilization or carrier system. For transparent aqueous products, discuss a carrier-grade option before committing the formula.
Open public stability summary; full marker retention curve and raw stability data are available under NDA. Testing was packaged in light-protected aluminum foil bags.
| Item | Detail |
|---|---|
| Shelf life | 24 months from production date, sealed, protected from light, cool and dry (≤25 °C) |
| Long-term (0/3/6/12/24 months) | 25 °C / 60% RH; thymoquinone retention ≥90% of initial value at 24 months, remains above grade minimum specification |
| Accelerated (0/3/6 months) | 40 °C / 75% RH; no significant color shift, assay stays within grade specification |
| Sensitivities | Moisture, prolonged light exposure, strong oxidation; keep sealed after opening |
| Item | Detail |
|---|---|
| Stock status | Min. 2% / 5% / 10% grades regularly stocked in 80 mesh |
| Sample lead time | 3–5 business days |
| Standard order | 15–20 business days (quantity and packaging dependent) |
| Custom mesh / blend | Schedule in advance; lead time confirmed at quotation |
Same botanical source; carrier or blend composition to be confirmed per grade. Select grade based on target loading, dosage form and labeling requirement.
| Grade | Best For | Notes |
|---|---|---|
| Min. 2% TQ | Daily supplement capsules, low-load skincare emulsions | Lower marker load; suitable for routine blending workflows |
| Min. 5% TQ | Medium-potency supplements, targeted skincare actives | Commonly selected for mid-load finished formulations |
| Min. 10% TQ | High-load premixes, concentrated blends | Higher marker load; pre-dispersion, antioxidant and light protection recommended |
FocusHerb operates production facilities with ISO 22000 and FSSC 22000 certification for botanical raw materials. GMP status and certification scope are available on request; certificate numbers and scope can be provided during supplier qualification.
| Item | Detail |
|---|---|
| Certifications | ISO 22000, FSSC 22000; Kosher/Halal certification or statement available by project (confirm scope at quotation) |
| Batch document | COA issued per production batch; MSDS, TDS are version-controlled global documents |
| Sample policy | 1 kg trial sample available; sample freight cost to be confirmed before shipment |
| Stability data | Public summary shown above; full marker retention data available under NDA |
Disclaimer: This table is for orientation only and does not constitute regulatory approval. Final compliance depends on market, finished-product category, use level and labeling.
| Market | Status | Key condition |
|---|---|---|
| China | Cosmetic raw material, INCI: Nigella Sativa Seed Extract | Cosmetic ingredient status only; food/supplement use requires separate regulatory assessment. |
| USA | Cosmetic use and dietary supplement use assessed separately | Dietary ingredient status to be verified before supplement launch. |
| EU | Cosmetic inventory status to be confirmed against CosIng | Supplement use subject to applicable food law. |
| Korea / ASEAN | Regional ingredient listing and labeling rules apply | Confirm compliance per target market before launch. |
We can provide a market-specific regulatory statement on request.
| Item | Detail |
|---|---|
| Trial sample | 1 kg trial sample available |
| Commercial MOQ | 25 kg; 5 kg carton option available for small batch runs |
| Packaging | 1 kg foil bag · 5 kg carton · 25 kg fiber drum with food-grade PE liner |
| Pricing | Quoted by grade, mesh, packaging and order quantity |
| Documents per batch | COA per batch; MSDS, TDS as version-controlled documents. Non-GMO, allergen statement, Halal/Kosher on request |
| Storage | Sealed, protected from light, cool and dry; recommended ≤25 °C. |
Custom & OEM: Custom mesh, carrier blends (maltodextrin, phospholipid) and marker-adjusted grades can be developed per project. Stability validation cycle is required before mass production. Discuss a custom specification →
The extract is a standardized powder controlled to a minimum thymoquinone marker level (2%, 5% or 10% by HPLC). The seed oil is a cold-pressed vegetable oil that naturally contains low levels of thymoquinone and is not standardized to a marker assay. Choose the extract when you need controlled raw material marker levels; choose the oil when you need a carrier oil base.
Thymoquinone assay is determined by HPLC-UV at 259 nm, reported on a dry basis against the selected minimum grade specification. Each released batch carries a COA showing the marker assay and impurity profile for side-by-side batch comparison.
The extract powder is soluble in ethanol and dispersible in oil carriers; it disperses in water only with a solubilizer or carrier system. For clear aqueous serums or toners, discuss a solubilized or carrier-grade preparation before locking the formula.
They share the same botanical source, but carrier/blend composition is confirmed per grade. Marker loading differs, so finished-product claim and dosing must match the selected grade. Switching grades after launch requires new assay review and formulation testing.
Yes, carrier-loaded grades such as maltodextrin blends can be developed for aqueous or premix applications. Loading level and dispersibility are confirmed during the project quotation and stability validation.
Deep dives into marker standardization, delivery systems and the distinction between extract, oil and monomer.
All articles are written by our R&D and regulatory team. View all technical resources →
Tell us the dosage form, target thymoquinone grade, target market and packaging requirement. We will reply with a matched grade, redacted sample COA and specification sheet.
If your formulation is better served by the seed oil or the high-purity monomer, we will clearly recommend the correct material.
We aim to respond within 2 business hours (Mon–Fri, GMT+8).