Home › Products › Cosmetic Actives › Retinol
Vitamin A · Anti‑Aging Cosmetic Active

Retinol — ≥99% HPLC Crystalline Powder

视黄醇 / 维生素A醇 · CAS 68-26-8

Gold‑standard vitamin A active for anti‑aging, texture refinement and epidermal renewal. The core formulation constraint is extreme sensitivity to UV, oxygen and heat — packaging, antioxidants and delivery vehicle define shelf stability and finished‑product performance.

Specification

Full specification — ≥99% crystalline grade

Batch release HPLC testing. Inclusion and microencapsulated grades use separate specs with carrier content and surface release testing.

Process: Chemical synthesis, purification, recrystallization under low‑oxygen, low‑light conditions. Filled under nitrogen purge. Oxidation control is the core process control point. Detailed process and impurity control available under NDA.

ParameterSpecification / MethodNote
Assay≥ 99.0% (HPLC)Inclusion grades show loaded assay
Detection325 nmHPLC‑UV quantitation
AppearancePale yellow crystalline powderDarkening indicates oxidation
Melting point62 ~ 64 °CIdentity check
Loss on drying≤ 0.5%
Residue on ignition≤ 0.1%
Total heavy metals≤ 10 ppmCosmetic raw material standard
Lead (Pb)≤ 0.5 ppm
Arsenic (As)≤ 0.3 ppm
Mercury (Hg)≤ 0.1 ppm
Cadmium (Cd)≤ 0.5 ppm
Total aerobic count≤ 100 cfu/g
Yeast & mould≤ 10 cfu/g
E. coli / SalmonellaNot detectedPer 25 g
Related retinoid impuritiesEach single ≤0.3%; total ≤1.0%Retinal, retinoic acid, cis‑isomers

Additional tests (antioxidant compatibility, photostability, preservative challenge) available on request. The sample COA shows cis‑isomer and oxidation impurity profile, critical for formulation.

Formulation

Solubility and what it means for your dosage form

Pure retinol is oil‑soluble, practically insoluble in water. Light, heat and oxygen drive degradation. Vehicle selection and antioxidant system determine finished product shelf life.

Dosage formConstraintViable engineering path
Oil serum / anhydrous balm Good solubility in oils; still prone to oxidation. Add BHT / BHA / tocopherol; amber glass, nitrogen headspace.
O/W or W/O emulsion cream Water interface accelerates oxidation; UV penetrates emulsion. Add chelator + antioxidant system; avoid high heat homogenization.
Aqueous clear serum Insoluble in water; rapid degradation without protection. Cyclodextrin inclusion complex or solubilizer system.
Powder skincare / pressed powder Crystal retinol is unstable in open powder matrix. β‑cyclodextrin inclusion powder or microcapsule grade.

Key formulation data: soluble in vegetable oils, ethanol, isopropyl myristate; insoluble in water. Degradation products include cis‑isomers, retinal and retinoic acid.

Pure retinol crystal is not suitable for direct addition to clear aqueous formulas. For water‑based transparent products, use our cyclodextrin inclusion grade.

Stability & Supply

Shelf life and availability

Two critical questions cosmetic buyers ask: how to store raw material, and what finished‑product stability to expect.

Stability

ItemDetail
Raw crystal shelf life24 months, sealed, nitrogen flushed, −20 °C, dark
2–8 °C storage6–12 months usable; assay loss accelerates
Accelerated40 °C / 75% RH: not recommended for pure crystal
SensitivitiesUV light, oxygen, heat, heavy metal ions; incompatible with strong oxidants

Full photostability and antioxidant screening data available under NDA for formulators.

Supply & lead times

ItemDetail
Stock status99% crystal regularly stocked, shipped cold chain
Sample lead time3–5 business days, cold pack shipment
Standard order10–18 business days, cold chain logistics
Inclusion / microcapsuleProduction schedule required, longer lead time
CapacityAnnual capacity and GMP documentation available for audit

Cold chain freight is mandatory for pure crystalline retinol to avoid assay drop in transit.

Grade selection

Which grade matches which application

Assay purity is not the only decision variable; delivery vehicle defines stability, irritation profile and formulation compatibility.

Grade / attributeTypical matchWhy
≥99% HPLC crystalOil serums, anhydrous products, custom emulsionsHighest purity; formulator controls antioxidant & encapsulation system.
10% β‑CD inclusion powderWater‑compatible formulas, powder masks, pressed powdersSuppresses odor and light degradation; free‑flowing powder.
Microencapsulated retinolMild anti‑aging lotions, sensitive‑skin linesControlled release, lower irritation, improved shelf stability.
Custom solubilized retinolClear aqueous toners, essencePre‑solubilized carrier system; formulation locked at supplier side.

Custom loaded grades and custom shell materials for microcapsules can be developed. MOQ and stability validation timeline confirmed at quotation.

Regulatory

Regulatory status by market

Status applies to retinol as cosmetic raw material. Finished product concentration limits, warning labels and use restrictions are formulator responsibility.

MarketStatusKey condition
ChinaCosmetic raw material, INCI: RETINOLCompliant with cosmetic safety spec; usage limit and warning label required.
USAAllowed cosmetic ingredientFDA cosmetic guidance; label warnings for retinoids.
EUAllowed under Cosmetics Regulation 1223/2009Maximum concentration limits and mandatory warnings apply.
Korea / ASEANListed cosmetic activeRegional concentration and labelling rules differ.
Commercial

MOQ, packaging and what drives price

ItemDetail
MOQ5 g sample / trial; 100 g minimum formal order; 1 kg standard packaging.
PackagingAmber aluminum foil bag, nitrogen flushed; 1kg / 5kg lightproof HDPE drum.
Price driversCrystal vs inclusion / microcapsule, order quantity, cold‑chain shipping, GMP documentation batch testing.
Documents per batchCOA, MSDS, TDS. IPEC, non‑GMO, allergen statement on request.
Storage−20 °C, dark, sealed, inert atmosphere; avoid repeated freeze‑thaw cycles.

Custom & OEM: Custom loading, cyclodextrin carriers, microcapsule shell types and pre‑solubilized oil systems available. Stability testing cycle is required before mass production. Discuss a custom specification →

No fixed public price listed. Cold chain and stability testing make pricing order‑specific; quotation will include logistics and storage guidance.

Technical FAQ

Questions that come up during evaluation

What is the difference between retinol, retinal and retinoic acid?

Retinol (vitamin A alcohol) is the pro‑active form used in over‑the‑counter cosmetics. Retinal is one oxidation step closer; retinoic acid is prescription‑only in many markets. Our material is pure retinol, not retinal or tretinoin.

Why does pure retinol turn yellow‑brown over time?

Color shift is oxidation. UV, oxygen, heat and transition metals accelerate formation of cis‑isomers and oxidation impurities. Once discolored, assay has declined and irritation risk increases. Raw material must be stored frozen and protected.

Can I add pure retinol directly to a toner or aqueous serum?

Not without a solubilization or inclusion system. Retinol is water insoluble and rapidly degrades in water. For clear aqueous formulas, select our β‑cyclodextrin inclusion grade instead of pure crystal.

Which antioxidant system works best for retinol?

Common validated system: tocopherol + BHT + EDTA‑2Na as chelator. Avoid high heat during emulsification. We can share a reference antioxidant blend with sample request.

Do you supply encapsulated retinol with low‑irritation release?

Yes, microencapsulated grade is available. Release profile, shell material and residual solvent are controlled parameters; we provide in‑vitro release data on request.

Next step

Discuss your application

Tell us your formula type, target retinol loading and packaging. We will return the matching grade, COA, spec sheet and baseline stability guidance.

If your formulation is incompatible with pure crystal retinol, we will recommend the inclusion or encapsulated option clearly.

You are enquiring about Retinol — ≥99% HPLC Crystalline Powder. The product context is attached to this form automatically.

We respond within 2 business hours with COA, spec sheet and formulation notes for retinol protection.