Home › Products › Plant Extracts › Nigella Sativa Seed Extract
Plant Extract · Standardized Botanical Active

Nigella Sativa Seed Extract — Standardized Black Cumin Extract Powder

黑种草提取物 / 黑种草籽提取物 · INCI: Nigella Sativa Seed Extract · Marker: Thymoquinone CAS 490-91-5

Standardized Nigella sativa seed extract, HPLC-assayed to min. 2% / 5% / 10% thymoquinone. Suitable for capsules, tablets and skincare creams; not directly water-soluble — a carrier or solubilizer is required for clear aqueous systems. Each grade is released against an HPLC assay for raw-material marker consistency.

Raw-material batch consistency does not guarantee finished-product claims; final formulation and stability must be verified on the finished product.

Related Black Cumin Materials
Specification

Full specification — standardized extract grades

Batch release by HPLC against the selected minimum thymoquinone grade. The seed oil and high-purity monomer pages carry separate specifications with their own assay definitions.

Process: Ethanol/water extraction of Nigella sativa seed, followed by concentration, purification, drying and milling. Marker standardization is the core release control. Detailed process flow and impurity control parameters are available under NDA.

ParameterSpecification / MethodNote
Assay (Thymoquinone)Min. 2% / 5% / 10% (HPLC, dry basis)Grade selected at order
Detection259 nm (HPLC-UV)Marker quantitation
AppearanceBrown to dark yellow-brown fine powderUniform color, no visible foreign matter
Particle size≥ 95% through 80 mesh100 mesh on request
Loss on drying≤ 5.0%—
Ash≤ 5.0%—
Total heavy metals≤ 10 ppmGeneral specification; market-specific limits apply where required
Lead (Pb)≤ 0.5 ppm—
Arsenic (As)≤ 0.3 ppm—
Mercury (Hg)≤ 0.1 ppm—
Cadmium (Cd)≤ 0.5 ppm—
Total aerobic count≤ 1,000 cfu/g—
Yeast & mold≤ 100 cfu/g—
E. coli / SalmonellaNot detected in 25 g—
Residual solventEthanol/water extraction systemEthanol residue controlled per specification or customer requirement; pharma-grade control aligned with ICH Q3C available on request

Routine batch tests: heavy metals, microbiology, residual solvent. Additional tests (pesticide residue, PAH, allergen statement, non-GMO statement) available on request. The sample COA shows the thymoquinone assay and impurity profile for grade comparison.

Formulation Guidance

Dispersion behavior and what it means for your dosage form

This powder is soluble in ethanol and dispersible in vegetable oil carriers. Powder may settle in oil systems without a carrier; pre-dispersion and homogenization are recommended. It cannot form a true solution in plain water.

Dosage formConstraintViable engineering path
Capsule / tablet Dry state; dispersion is not the limiting factor. Direct blending of 80–100 mesh powder; control blend uniformity and flowability.
Oil serum / anhydrous balm Dispersible in oil; powder may settle on standing. Pre-disperse in a vegetable oil or emulsifier system; homogenize under controlled temperature.
Cream / lotion emulsion Powder dispersion across phases and marker stability under heat. Add at cooled-down stage where feasible; pair with chelator and antioxidant system.
Clear aqueous serum / toner Not water-soluble; direct addition causes sediment and cloudiness. Use a solubilized or carrier-loaded grade; review formula before lock.

Important: Direct addition to clear water-based formulas is not feasible without a solubilization or carrier system. For transparent aqueous products, discuss a carrier-grade option before committing the formula.

Stability & Supply

Shelf life and availability

Open public stability summary; full marker retention curve and raw stability data are available under NDA. Testing was packaged in light-protected aluminum foil bags.

Stability Profile (Public Summary)

ItemDetail
Shelf life24 months from production date, sealed, protected from light, cool and dry (≤25 °C)
Long-term (0/3/6/12/24 months)25 °C / 60% RH; thymoquinone retention ≥90% of initial value at 24 months, remains above grade minimum specification
Accelerated (0/3/6 months)40 °C / 75% RH; no significant color shift, assay stays within grade specification
SensitivitiesMoisture, prolonged light exposure, strong oxidation; keep sealed after opening

Supply & lead times

ItemDetail
Stock statusMin. 2% / 5% / 10% grades regularly stocked in 80 mesh
Sample lead time3–5 business days
Standard order15–20 business days (quantity and packaging dependent)
Custom mesh / blendSchedule in advance; lead time confirmed at quotation
Grade Selection

Which thymoquinone grade fits your project

Same botanical source; carrier or blend composition to be confirmed per grade. Select grade based on target loading, dosage form and labeling requirement.

GradeBest ForNotes
Min. 2% TQ Daily supplement capsules, low-load skincare emulsions Lower marker load; suitable for routine blending workflows
Min. 5% TQ Medium-potency supplements, targeted skincare actives Commonly selected for mid-load finished formulations
Min. 10% TQ High-load premixes, concentrated blends Higher marker load; pre-dispersion, antioxidant and light protection recommended
Trust & Qualification

Quality evidence overview

FocusHerb operates production facilities with ISO 22000 and FSSC 22000 certification for botanical raw materials. GMP status and certification scope are available on request; certificate numbers and scope can be provided during supplier qualification.

ItemDetail
CertificationsISO 22000, FSSC 22000; Kosher/Halal certification or statement available by project (confirm scope at quotation)
Batch documentCOA issued per production batch; MSDS, TDS are version-controlled global documents
Sample policy1 kg trial sample available; sample freight cost to be confirmed before shipment
Stability dataPublic summary shown above; full marker retention data available under NDA
Regulatory

Regulatory status by market

Disclaimer: This table is for orientation only and does not constitute regulatory approval. Final compliance depends on market, finished-product category, use level and labeling.

MarketStatusKey condition
ChinaCosmetic raw material, INCI: Nigella Sativa Seed ExtractCosmetic ingredient status only; food/supplement use requires separate regulatory assessment.
USACosmetic use and dietary supplement use assessed separatelyDietary ingredient status to be verified before supplement launch.
EUCosmetic inventory status to be confirmed against CosIngSupplement use subject to applicable food law.
Korea / ASEANRegional ingredient listing and labeling rules applyConfirm compliance per target market before launch.

We can provide a market-specific regulatory statement on request.

Commercial

MOQ, packaging and what drives price

ItemDetail
Trial sample1 kg trial sample available
Commercial MOQ25 kg; 5 kg carton option available for small batch runs
Packaging1 kg foil bag · 5 kg carton · 25 kg fiber drum with food-grade PE liner
PricingQuoted by grade, mesh, packaging and order quantity
Documents per batchCOA per batch; MSDS, TDS as version-controlled documents. Non-GMO, allergen statement, Halal/Kosher on request
StorageSealed, protected from light, cool and dry; recommended ≤25 °C.

Custom & OEM: Custom mesh, carrier blends (maltodextrin, phospholipid) and marker-adjusted grades can be developed per project. Stability validation cycle is required before mass production. Discuss a custom specification →

Technical FAQ

Questions that come up during evaluation

What is the difference between Nigella sativa extract and black cumin seed oil?

The extract is a standardized powder controlled to a minimum thymoquinone marker level (2%, 5% or 10% by HPLC). The seed oil is a cold-pressed vegetable oil that naturally contains low levels of thymoquinone and is not standardized to a marker assay. Choose the extract when you need controlled raw material marker levels; choose the oil when you need a carrier oil base.

How is thymoquinone content standardized and tested?

Thymoquinone assay is determined by HPLC-UV at 259 nm, reported on a dry basis against the selected minimum grade specification. Each released batch carries a COA showing the marker assay and impurity profile for side-by-side batch comparison.

Is this extract suitable for clear water-based formulas?

The extract powder is soluble in ethanol and dispersible in oil carriers; it disperses in water only with a solubilizer or carrier system. For clear aqueous serums or toners, discuss a solubilized or carrier-grade preparation before locking the formula.

Can the 2%, 5% and 10% grades be switched after formula development?

They share the same botanical source, but carrier/blend composition is confirmed per grade. Marker loading differs, so finished-product claim and dosing must match the selected grade. Switching grades after launch requires new assay review and formulation testing.

Do you supply a water-dispersible or carrier-loaded version?

Yes, carrier-loaded grades such as maltodextrin blends can be developed for aqueous or premix applications. Loading level and dispersibility are confirmed during the project quotation and stability validation.

Next step

Discuss your application

Tell us the dosage form, target thymoquinone grade, target market and packaging requirement. We will reply with a matched grade, redacted sample COA and specification sheet.

If your formulation is better served by the seed oil or the high-purity monomer, we will clearly recommend the correct material.

We aim to respond within 2 business hours (Mon–Fri, GMT+8).

You are enquiring about Nigella Sativa Seed Extract — standardized black cumin extract powder (min. 2% / 5% / 10% thymoquinone HPLC). The product context is attached to this form automatically.

Your data will not be shared with third parties. We aim to respond within 2 business hours (Mon–Fri, GMT+8).